iQ-Therm 80

Capillary active polyurethane rigid foam panel for creating highly insulating, diffusion-capable interior insulation with capillary moisture transport

This product is not available to buy online. Please contact us for pricing and more information.

€ 0.00 EUR

INCL. VAT

All prices specified on our website include VAT. Contact our team for bulk pricing and trade discounts.

View Paint Colours

call

Need Help? Call us

No items found.

Delivery Information

Unless otherwise specified all products within Ireland should be delivered within 2-3 working days. Please contact us for delivery options outside of Ireland or if you wish to ship to Northern Ireland.
‍
Our stock is primarily shipped by Fastway or via the pallet network depending on the total weight of the order. The delivery method will be automatically assigned and priced at checkout. All delivery prices include VAT.

Main Purpose

Coverage

Field of application

Mould control and prevention in existing buildings
Implementation of the hygienic minimum heat insulation level in existing buildings
Improving the room climate by increasing the wall surface temperature

Properties

Excellent thermal insulation
Water vapour permeable
Capillary-active
Thermal conductivity (nominal value) approx. 0.031 W/(m•K)
Low construction height
Easy to apply
Thermal insulation material according to DIN 4108-10

‍

Product specifications

Thermal conductivity (λ 10 dry)0.033 W/(m•K)

Water vapour diffusionμ= approx. 27

Building material classB2 normal flammability according to DIN 4102 - 1

Dry densityApprox. 45 kg/m³

The stated values represent typical product characteristics and are not to be construed as binding product specifications.

‍

Preparation

Substrate requirements

The substrate must be clean and capable of bearing a load.
The substrate must be level.
Preparations
Level off and even out highly uneven substrates – use SP Level to close up joints and even out surfaces.

Application

Pre-wet absorbent substrates.
Apply iQ Fix to the substrate as a scratch coat.
Using a notched scraper, apply iQ Fix wet-on-wet to the rear face of the panel and the substrate.
Position and press on the boards from the bottom up.
Align using a floating rule.

Application instructions

Mark the desired dimensions on the board.
Cut using a jigsaw or hand-held circular saw.
Rework the cut edges with a rasp or file if necessary.
Make sure that the panels are correctly aligned (the side marked "plaster side" must be visible after application).
Avoid cross joints.
Make sure that full-surface bonding is achieved.

Working tools / cleaning

Cutter knife and jigsaw

Storage / shelf life

Dry and frost-free.

‍

Technical Data Sheet