Epoxy BS 3000 SG

Product specifications

Solids content65% by mass

Component A

Density (20°C)1.5 g/cm³

Viscosity (25 °C)400 mPa s

Component B

Density (20°C)1.1 g/cm³

Viscosity (25 °C)200 mPa s

Mixture

Density (20°C)1.4 g/cm³

Viscosity (25 °C)750 mPa s

The stated values represent typical product characteristics and are not to be construed as binding product specifications.

‍

‍

‍

Preparation

Substrate requirements

• The substrate must be firm, dimensionally stable, capable of bearing loads and free of loose constituents, dust, oil, grease, rubber marks and other substances that could interfere with adhesion.
• The substrate must be prepared using suitable Remmers Water Vapour Diffusion-Open products.
• For OS 8 systems, please see the corresponding test certificate.

• Combination container
• Add the entire quantity of the hardener (component B) to the base compound (component A).
• Mix thoroughly with a slow-speed electric mixer
  (approx. 300 - 400 rpm).
• Pour the mixture into a separate container and mix again thoroughly.
• Mix for at least 3 minutes.
• Insufficient mixing is indicated by streaks forming.

Application

Application requirements

• Temperature of the material, air and substrate: from min. +8 °C to max. +30 °C
• The times given are reduced at higher temperatures and increased at lower temperatures, in particular in combination with high humidity.

Working tools / cleaning

• Notched trowel, smoothing trowel, paintbrush, epoxy roller and mixing apparatus
• More detailed information can be found in the Remmers Tool Programme.
• Clean tools, equipment and any splashed material immediately with water while still fresh.
• Take suitable protective and waste disposal measures when cleaning.

Storage / shelf life

• If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 9 months.

‍

‍